Oven Not Heating Properly? What Is Really Going On
Uneven baking, slow preheats and a cold oven are usually one failed part. Here is how to tell them apart and why gas and electric ovens are not weekend projects.
An oven that will not heat, heats slowly or bakes unevenly is almost always a failed igniter, heating element, temperature sensor or control board. All four are technician repairs, and gas ovens in particular should never be opened up at home. Run the three checks below, then book.
What You Are Probably Seeing
Any one of these is enough to book. Two or more together usually mean the fault has been developing for a while, and waiting tends to make the repair bigger.
- Oven takes far longer than usual to preheat
- Food is burnt on one side and raw on the other
- Bake works but broil does not, or the reverse
- Gas oven clicks but never lights, or lights and then goes out
- Temperature reads wrong, or swings wildly during a cook
- An F or E code on the display
What Is Usually Behind It
These are the causes our technicians actually find on this call in Palm Beach and Broward homes, in roughly the order we see them.
Weak or failed igniter (gas)
The igniter glows but never gets hot enough to open the gas valve, or takes minutes to do it. The most common gas oven repair we do.
Burned-out bake or broil element (electric)
A visible blister, break or bright spot on the element. It will not glow evenly, or at all.
Temperature sensor out of range
The oven thinks it is hotter or colder than it is. Preheats end early, cooks run long, and calibration drifts.
Control board or relay
The oven ignores the setting, shows a code, or a function simply stops responding.
Three Quick Checks While You Book
None of these involve tools, panels or parts, and they take about a minute. They tell our technician useful things before we arrive. The diagnosis itself is ours to make, and your diagnostic is applied to the repair when service is approved.
Is the oven in a locked or timed mode?
Sabbath mode, a delayed start, or a self-clean lock will block heating. Check the display for a lock icon or a timer.
Is the electric range getting full power?
An electric oven needs both legs of a 240V circuit. If the cooktop works but the oven does not, a tripped double breaker is possible. Reset it once only.
Is the gas supply on?
If another gas appliance in the home is also cold, the issue may be supply rather than the oven. Do not go further than checking the valve position.
- If you smell gas, leave the house and call 911 and your gas utility from outside. Do not troubleshoot.
- Do not replace an igniter or element yourself. The gas valve and 240V wiring behind them are the hazard, not the part.
- Do not keep running self-clean to "burn out" a problem. High heat cycles are how control boards and door locks fail.
What Happens When You Book
- 01
Tell us three things.
What appliance you have, what brand it is, and what it is doing. That is all we need.
- 02
An experienced appliance repair technician arrives.
Same-day and next-day appointments across South Palm Beach and Broward Counties. We diagnose the fault and quote it in writing before touching anything. When needed, we consult manufacturer technical support and service resources to help diagnose complex issues.
- 03
Approve the repair. Your diagnostic is applied to the repair.
Genuine OEM parts where they exist, a full performance check, and a 90-day warranty on parts and labor.
If no repair is performed, the diagnostic/service call is $69 residential or $129 commercial. Every completed repair carries a 90-day warranty on parts and labor.
Questions We Hear on This Call
Why does my oven bake unevenly?
Usually a failing element or a sensor reading wrong, so the oven cycles at the wrong temperature. Convection fan failure causes the same symptom on convection models. A calibration check on the visit tells us which.
Is it worth repairing an older oven?
Ovens and ranges are long-lived, and igniters, elements and sensors are affordable parts. Premium ranges from Wolf, Viking, Thermador and similar brands are almost always worth repairing.
What does the visit cost?
The residential diagnostic/service call is $69 and is applied to the repair when service is approved. If no repair is performed, the diagnostic remains $69 residential. Commercial diagnostic visits are $129. Every completed repair carries a 90-day warranty on parts and labor.
Other Problems We Fix Every Day
Have a problem you need fixed now?
You do not need to diagnose it yourself. Tell us what it is doing and we will take it from there.